image Guest

You need to login to ask any Questions from chapter Structural-Engineering-Loksewa-Questions of Structural-Engineering

Chapter:

Structural-Engineering-Loksewa-Questions

1. A bar is subjected to a tensile load of 150kN. If stress in middle portion is limited to 160 N/mm2, what will be diameter of middle portion of total elongation of bar is 0.25cm (E= 2 x 105)?
A bar is subjected to a tensile load of 150kN. If stress in middle portion is limited to 160 N/mm2, what will be diameter of middle portion of total elongation of bar is 0.25cm (E= 2 x 105)?\r\n \r\n


Hint Answer

2. A solid uniform metal bar is hanging vertically from its upper end. Its elongation will be _____


Hint Answer

3. Which stress comes when re is an eccentric load applied?


Hint Answer

4. A composite bar of two sections of equal length and given diameter is under an axial pull of 15kN. What will be stresses in two sections in N/mm2?


Hint Answer

5. A material has a Poisson’s ratio of 0.5. If uniform pressure of 300GPa is applied to that material, What will be volumetric strain of it?


Hint Answer

6. How does elastic constant varys with elongation of body?


Hint Answer

7. Photo stress method is _______


Hint Answer

8. The stress which acts in a direction perpendicular to area is called ________


Hint Answer

9. The stress in a rod is 70 N/mm2 and modulus of elasticity is 2 x 105 N/mm2. what will be strain in rod?


Hint Answer

10. A cube having each side of length p, is constrained in all directions and is heated unigormly so that temperature is raised to T.C. What will be stress developed in cube?


Hint Answer

Nexttt

All Chapters

View all Chapter and number of question available From each chapter from Structural-Engineering

Simple Stress and Strain

Simple Stress and Strain

Stresses in Members

Stresses in Members

Strain Energy and Resilience

Strain Energy and Resilience

Center of Gravity and Moment of Inertia

Center of Gravity and Moment of Inertia

Shear Force and Bending Moment

Shear Force and Bending Moment

Pure Bending

Pure Bending

Shear Stress

Shear Stress

Direct and Bending Stress

Direct and Bending Stress

Slope and Deflection

Slope and Deflection

Indeterminate Beams

Indeterminate Beams

Torsion

Torsion

Plastic and Local Buckling Behaviour of Steel

Plastic and Local Buckling Behaviour of Steel

Cables and Arches

Cables and Arches

Influence Lines and Approximate Analysis for Statically Determinate Structures

Influence Lines and Approximate Analysis for Statically Determinate Structures

Deflections

Deflections

Deflections Using Energy Methods

Deflections Using Energy Methods

Displacement Method of Analysis: Slope-Deflection Equations

Displacement Method of Analysis: Slope-Deflection Equations

Displacement Method of Analysis: Moment Distribution

Displacement Method of Analysis: Moment Distribution

Influence line diagram mcqs

Influence line diagram mcqs

Structural engineering important exam questions

Structural engineering important exam questions

Structural engineering important exam questions II

Structural engineering important exam questions II

Structural engineering important exam questions III

Structural engineering important exam questions III

Plastic Analysis

Plastic Analysis

Structural Engineering Loksewa Questions

Structural Engineering Loksewa Questions

Topics

This Chapter Structural-Engineering-Loksewa-Questions consists of the following topics

Stresses in Members

A bar is subjected to a tensile load of 150kN. If stress in middle portion is limited to 160 N/mm2, what will be diameter of middle portion of total elongation of bar is 0.25cm (E= 2 x 105)?
A bar is subjected to a tensile load of 150kN. If stress in middle portion is limited to 160 N/mm2, what will be diameter of middle portion of total elongation of bar is 0.25cm (E= 2 x 105)?\r\n \r\n

;

A solid uniform metal bar is hanging vertically from its upper end. Its elongation will be _____

;

Which stress comes when re is an eccentric load applied?

;

A composite bar of two sections of equal length and given diameter is under an axial pull of 15kN. What will be stresses in two sections in N/mm2?

;

A material has a Poisson’s ratio of 0.5. If uniform pressure of 300GPa is applied to that material, What will be volumetric strain of it?

;

How does elastic constant varys with elongation of body?

;

Photo stress method is _______

;

The stress which acts in a direction perpendicular to area is called ________

;

The stress in a rod is 70 N/mm2 and modulus of elasticity is 2 x 105 N/mm2. what will be strain in rod?

;

A cube having each side of length p, is constrained in all directions and is heated unigormly so that temperature is raised to T.C. What will be stress developed in cube?

;