A steel bar 600mm long and having 30mm diameter, is turned down to 25mm diameter for one fourth of its length. It is heated at 30 C above room temperature, clamped at both ends and then allowed to cool to room temperature. If the distance between the clamps is unchanged, the maximum stress in the bar ( α = 12.5 x 10-6 per C and E = 200 GN/m²) is

What is the factor of safety?

A steel rod 10mm in diameter and 1m long is heated from 20 to 100 degree celcius, E = 200 GPa and coefficient of thermal…

A tensile rod of 40kN is acting on a rod of diameter 40mm and of length 4m. a bore of diameter 20mm is made centrally on…

A material has a Poisson’s ratio of 0.5. If uniform pressure of 300GPa is applied to that material, What will be the vol…

A member ABCD is subjected to points load P1=45kN, P2, P3=450kN and P4=130kN. What will be the total elongation of the m…

A block 100mm x 100mm base and 10mm height. What will the direct shear stress in the element when a tangential force of …

A diagram which shows the variations of the axial load for all sections of the pan of a beam is called ________

A round bar made of same material consists of 4 parts each of 100mm length having diameters of 40mm, 50mm, 60mm and 70m…