The beam shown in the figure carries loads of 20kN and 40kN at point C and D respectively and produces a deflection of 6…

A and C is a pin support while B is roller support. XL and XR are centroid of uniform loading on beams AB and BC resp…

Ray = reaction at support A in y direction. Sign convention is as usual. Beam is linear elastic. Point A is a p…

Which one of the following is the correct combination of loading for the maximum negative moment at section C for the gi…

Maxwell’s reciprocal theorem is applicable for elastic materials only.

In general, any structure can be classified as a symmetric one :-

In above figure, joint A is fixed and joint B is pinned. C lies in between A and B and a load of P are applied there. …

For computational purposes, deflected primary structure ans actual structure should be _______