The cross section of beam is combination of _______

The cracks appear when the tensile stresses at the soffit are equal to ________

The rate of increase in stress in the tendons of a prestress concrete member depends upon ________

A rectangular beam of 300mm wide and 800mm deep supports two concentrated loads of 20kn each at a span of 9m. Calculate …

When the beam supports two concentrated loads, the cable follows which profile?

A rectangular concrete beam of cross section 100mm wide and 400mm deep is prestressed by a straight cable of span 6m, im…

In case of eccentric prestressing force the support force Fsup is _______

The diagram indicating the direct stress of the beam is?