The prestressing force of 90 to 95 percent is obtained at about ________

The magnitude of maximum tensile stresses found to occur at the centroid of end face when x is zero is ________

What should be provided in case of end zone reinforcements to prevent failure of corner zones?

A pretensioned beam is prestressed using 5mm diameter wires, τ bp = 7.42, ϕ = 0.00725, Lt = 485mm. Calculate the bond st…

The transverse tensile stress in transmission zone is developed due to concentration of ________

The bond stress at intermediate points is resisted by ______

In a pretensioned system, when a wire is released from its temporary anchorage the end of the wire swells as a result of…

The transmission length prevailing at the time of transfer does not remain ______