The length of beam within which the dispersion of prestressing force takes place is known as ________

The main plate of the member in the anchorage zone has minimum edge distance of at least ________

The term anchorage zone or end block is termed as ________

The tensile stresses which tend to split the concrete are placed in the transverse direction to the ________

The parameters considered for concrete prisms are ________

The bursting force with depth of beam d’ and the depth of anchor plate d is given by?

The end block and a prestressed beam, 200mm wide and 300mm deep, has two Freyssinet anchorages (100mm diameter) with the…

The longitudinal extent of the concrete member which is rectangular in cross section is ________