Check for ultimate flexural strength if given Aps is 154mm2, fpu is 1600n/mm2, b is 160mm, fcu is 50n/mm2and diameter is…

The fully prestressed members are prone to excessive _______

Check for deflection due to prestressing force if given data is Prestressing force is 182×103 eccentricity of cable is 1…

Find minimum range of stresses if fct is 15n/mm2, fcw is 17, ftw is zero, fu is -1n/mm2, ɳ is 0.8?

Find ratio for ultimate flexural strength at the centre – span section given that Aps = 3000mm2, d = 1150mm, fcu = 50n/m…

Which type of reinforcement is required for the advantage of partial prestressing?

Find prestressing force if area is 36.75mm2 of eccentricity 580 given finf is 26.5kn/m and zb is 99×106?

Find ultimate shear strength (check it for safe against shear failure) if vu is 27.75kn, Loss ratio is 0.8, prestressing…