Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

2 1.5 2.5 3

Hint Answer

Previous Question

Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-engineering-I

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

If cutting tool travel 1000mm in the direction of feed motion with work piece rotational speed of 500 rpm and feed rate of 0.2mm/rev, machining time in minutes will be

Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

Compound rest swiveling method in taper turning operation is most suitable for

Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I

Chapter:

Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

1.5

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

If cutting tool travel 1000mm in the direction of feed motion with work piece rotational speed of 500 rpm and feed rate of 0.2mm/rev, machining time in minutes will be

Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

Compound rest swiveling method in taper turning operation is most suitable for

Facing of work piece of diameter 72mm is need to be done at spindle speed of 80 rev per min at cross feed of 0.3mm/rev. The time required in minute for facing operation will be

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I