During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be value of taper gradient for a job of 1m in length?

15.01 19.29 28.35 56.31

Hint Answer

Previous Question

Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-engineering-I

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

What will be the value of diameter of small end in mm for tapered job if diameter of big end and length of job is 60mm and 1m respectively? Given half taper angle is equal to 1.14 degrees.

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be value of taper gradient for a job of 1m in length?

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of Conicity for a job of 1m in length?

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of taper gradient for a job of 1m in length?

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I

Chapter:

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be value of taper gradient for a job of 1m in length?

19.29

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

What will be the value of diameter of small end in mm for tapered job if diameter of big end and length of job is 60mm and 1m respectively? Given half taper angle is equal to 1.14 degrees.

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be value of taper gradient for a job of 1m in length?

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of Conicity for a job of 1m in length?

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of taper gradient for a job of 1m in length?

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I