The job of total length 300mm is tapered turned on la using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

10 15 20 25

Hint Answer

Previous Question

Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-engineering-I

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of Conicity for a job of 1m in length?

The job of total length 300mm is tapered turned on la using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

A job of total length 800mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 450mm and 500mm and length of taper was 700mm only. Tail stock set over is equal to

The job of total length 300mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I

Chapter:

The job of total length 300mm is tapered turned on la using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

15

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

During taper turning operation 100mm of smaller side diameter and 800mm of bigger side diameter was required. What will be the value of Conicity for a job of 1m in length?

The job of total length 300mm is tapered turned on la using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

A job of total length 800mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 450mm and 500mm and length of taper was 700mm only. Tail stock set over is equal to

The job of total length 300mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 80mm and 500mm and length of taper was 200mm only. Tail stock set over is equal to

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I