A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should angle in degrees by which compound rest should be rotated?

20.36 45.21 14.03 5.23

Hint Answer

Previous Question

Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-engineering-I

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

A job of total length 800mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 450mm and 500mm and length of taper was 700mm only. Tail stock set over is equal to

A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should angle in degrees by which compound rest should be rotated?

Distance measured normal to the axis of part, between crest and root of thread is known as

A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling the compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should the angle in degrees by which compound rest should be rotated?

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I

Chapter:

A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should angle in degrees by which compound rest should be rotated?

14.03

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

A job of total length 800mm is tapered turned on lathe using tailstock set over method. The two diameters obtained are 450mm and 500mm and length of taper was 700mm only. Tail stock set over is equal to

A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should angle in degrees by which compound rest should be rotated?

Distance measured normal to the axis of part, between crest and root of thread is known as

A cast iron piece of total length 100mm is needed to be tapered for a length of 40mm using swiveling the compound rest method. Diameter of job is 20mm and smaller end have nearly zero diameter. What should the angle in degrees by which compound rest should be rotated?

Lathe Machines

Shaping and Slotting

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Lathe-Machines,-Shaping-and-Slotting of Manufacturing-engineering-I