Guest
You need to login to ask any Questions from chapter Jigs-and-Fixture,-Applications-and-Gears of Manufacturing-engineering-I

Chapter:

Jigs-and-Fixture,-Applications-and-Gears

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

N010GO3X7.0Y2.0I5.0J2.0 N010GO2X7.0Y2.0I5.0J2.0 N010GO1X7.0Y2.0I5.0J2.0 N010GOOX7.0Y2.0I5.0J2.0

Hint Answer

Previous Question

Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-engineering-I

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

The basic geometric building blocks provided in a CAD/CAM package are

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

The basic geometric building blocks provided in a CAD/CAM package are

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

In an NC machining operation

the tool has to be moved from point (5

4) to point (7

2) along a circular path with centre at (5

2). Before starting the operation

the tool is at (5

4). The correct G and N codes for this motion are

Jigs and Fixture

Applications and Gears

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Jigs-and-Fixture,-Applications-and-Gears of Manufacturing-engineering-I

Chapter:

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

N010GO2X7.0Y2.0I5.0J2.0

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

Guest You need to login to ask any Questions from chapter Jigs-and-Fixture,-Applications-and-Gears of Manufacturing-engineering-I

Chapter:

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

N010GO2X7.0Y2.0I5.0J2.0

All Chapters

Crystallography and Defects in Solid

Mechanical Properties and Testing and Phase Diagram

Ferrous Metal, Non-Ferrous Metal and Heat Treatment

Magnetic Properties of Material, Electrical Properties of Materials, Plastics, Ceramics and Composites

Metal Cutting

Cutting-Tool Materials and Cutting Fluids

Lathe Machines, Shaping and Slotting

Milling, Drilling and Reaming

Grinding, Surface Finishing Operations and Unconventional Machining Processes

Metrology, Welding, Fusion-Welding Processes and Unconventional Welding Methods

Powder Metallurgy, NC Part Programming and Metal Casting and Gating Systems

Forming, Metal Forming Processes and Heat Transfer

Jigs and Fixture, Applications and Gears

Similar Question

The basic geometric building blocks provided in a CAD/CAM package are

In an NC machining operation, tool has to be moved from point (5, 4) to point (7, 2) along a circular path with centre at (5, 2). Before starting operation, tool is at (5, 4). The correct G and N codes for this motion are

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation?

In an NC machining operation

the tool has to be moved from point (5

4) to point (7

2) along a circular path with centre at (5

2). Before starting the operation

the tool is at (5

4). The correct G and N codes for this motion are

Jigs and Fixture

Applications and Gears

Manufacturing-engineering-I

Guest
You need to login to ask any Questions from chapter Jigs-and-Fixture,-Applications-and-Gears of Manufacturing-engineering-I