image Guest

You need to login to ask any Questions from chapter Electro-Chemical-Grinding-Machining of Manufacturing-Engineering-II

Chapter:

Electro-Chemical-Grinding-Machining

In ECM operation of pure iron an equilibrium gap (h) of 2 mm is to be kept. What will be supply voltage (v), if total overvoltage is 2.5 Volts. The resistivity(r) of electrolyte is 50 Ω-mm and set feed rate (f) is 0.25 mm/min.


Hint Answer

Previous Question
Next Question

All Chapters

View all Chapter and number of question available From each chapter from Manufacturing-Engineering-II

Similar Question

This Chapter Electro-Chemical-Grinding-Machining consists of the following topics

In ECM of pure iron a material removal rate of 600 mm3/min is required. What will be the current requirement?

In ECM operation of pure iron an equilibrium gap (h) of 2 mm is to be kept. What will be supply voltage (v), if total overvoltage is 2.5 Volts. The resistivity(r) of electrolyte is 50 Ω-mm and set feed rate (f) is 0.25 mm/min.

In ECM, workpiece acts as a cathode.

In ECM operation of pure iron an equilibrium gap (h) of 2 mm is to be kept. What will be the supply voltage (v)

if the total overvoltage is 2.5 Volts. The resistivity(r) of the electrolyte is 50 Ω-mm and the set feed rate (f) is 0.25 mm/min.

Electro-Chemical Grinding Machining

Manufacturing-Engineering-II