image Guest

You need to login to ask any Questions from chapter Heat-Transfer-from-Extended-Surfaces of Heat-Transfer

Chapter:

Heat-Transfer-from-Extended-Surfaces

A rod of 10 mm diameter and 80 mm length with rmal conductivity 16W/ m K protrudes from a surface at 160 degree Celsius. The rod is exposed to air at 30 degree Celsius with a convective coefficient of 25W/square m K. How does heat flow from this rod get affected if same material volume is used for two fins of same length? Assume short fin with insulated end


Hint Answer

Previous Question
Next Question

All Chapters

View all Chapter and number of question available From each chapter from Heat-Transfer

Similar Question

This Chapter Heat-Transfer-from-Extended-Surfaces consists of the following topics

An electronic semiconductor device generates 0.16 k J/hr of heat. To keep the surface temperature at the upper safe limit of 75 degree Celsius, it is desired that the heat generated should be dissipated to the surrounding environment which is at 30 degree Celsius. The task is accomplished by attaching aluminum fins, 0.5 square mm and 10 mm to the surface. Work out the number of fins if thermal conductivity of fin material is 690W/m K and the heat transfer coefficient is 45k J/square m hr K. Neglect the heat loss from the tip of the fin

A rod of 10 mm diameter and 80 mm length with rmal conductivity 16W/ m K protrudes from a surface at 160 degree Celsius. The rod is exposed to air at 30 degree Celsius with a convective coefficient of 25W/square m K. How does heat flow from this rod get affected if same material volume is used for two fins of same length? Assume short fin with insulated end

Two rods A and B of the same length and diameter protrude from a surface at 120 degree Celsius and are exposed at air at 25 degree Celsius. The temperatures measured at the end of the rods are 50 degree Celsius and 75 degree Celsius. If thermal conductivity of material A is 20W/ m K, calculate it for B

A rod of 10 mm diameter and 80 mm length with thermal conductivity 16W/ m K protrudes from a surface at 160 degree Celsius. The rod is exposed to air at 30 degree Celsius with a convective coefficient of 25W/square m K. How does the heat flow from this rod get affected if the same material volume is used for two fins of the same length? Assume short fin with insulated end

Heat Transfer from Extended Surfaces

Heat-Transfer