If Q is load factor, S is shape factor and F is factor of safety in elastic design, the fo…

In 1st angle projection the right-side view must be drawn on …………… side of FV 

Bitumen completely dissolves in 

In an election between two candidates, one got 55% of the total valid votes, 20% of the votes were invalid. If the total…

Shear strength in plastic undrained clay is due to  

The approximate value of the ratio between direct tensile strength and flexural strength is. 

A simply supported beam of span L carries a concentrated load W at its mid-span. The maximum bending moment M is 

For a clay slope of height of 10 m, the stability number is 0.05, γ = 2.0 t/m3, C = 2.5 t/m2, the critical height of the…