In architectural drawing ________ are often used to illustrate and detail structural components.

Dimension text is generally placed above the ________ line.

In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight…

Switches and relays should be shown in this position with no operating force or applied energy:

In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensi…

The text height for room names should be set to ________ for a drawing that will be plotted to a scale of $${\frac{1}{4}…

Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line create…

The typical parts list should include the _________.