For finding forces in the members of a truss by the graphical method. The force diagram is suggested by

A suspension cable, supporting loads will be under

The ratio of stiffness of a member when far end is hinged to that of the member when far end is fixed is

Plastic section modulus is defined as

The property by which the metals deforms continuously at a slow rate without further increase in stress is called

When the load does not pass through the shear centre of the steel beam. It produces

The algebraic sum of the vertical forces on either side of the section of a loaded beam is known as

Calculate the maximum BM introduced due to a udl of 4KN/m, if the span of the cantilever is 1.8m

At the yield point of a steel test piece: