image Guest

You need to login to ask any Questions from chapter Engineering-Surveying-Mcqs-1 of Engineering-Surveying-Mcqs

Chapter:

Engineering-Surveying-Mcqs-1

1. A relatively fixed point of known elevation above datum, is called


Answer

2. For indirect ranging, number of ranging rods required, is


Answer

3. In chain-surveying field work is limited to


Answer

4. The main principle of surveying is to work


Answer

5. The line of collimation method of reduction of levels, does not provide a check on


Answer

6. If h is difference in height between end points of a chain of length l, required slope correction is


Answer

7. Levelling across a river is done by


Answer

8. Systematic errors are those errors


Answer

9. The object of surveying is to be prepare


Answer

10. Planimeter is used for measuring


Answer

Nexttt

All Chapters

View all Chapter and number of question available From each chapter from Engineering-Surveying-Mcqs

Topics

This Chapter Engineering-Surveying-Mcqs-1 consists of the following topics

Engineering Surveying Mcqs 2

A relatively fixed point of known elevation above datum, is called

;

For indirect ranging, number of ranging rods required, is

;

In chain-surveying field work is limited to

;

The main principle of surveying is to work

;

The line of collimation method of reduction of levels, does not provide a check on

;

If h is difference in height between end points of a chain of length l, required slope correction is

;

Levelling across a river is done by

;

Systematic errors are those errors

;

The object of surveying is to be prepare

;

Planimeter is used for measuring

;