A project engineer receives a laboratory report with tests performed on the central material testing laboratory,IOE,Pulchowk. The engineer suspects that one of the measurement is in error. Are the engineers suspicions correct? If so, which of these values is wrong and what should be it's correct value? `gamma`=unit weight of sample`=18.4 (KN)/M^3` `gamma_s`=unit weight of solid`=26.1 (KN)/M^3` `w`=water content`=40%` `e`=void ratio`=1.12` `S`=degree of saturation`=95%` [2072 Magh] [8]

Draw phase diagram of soil for different degree of saturation. Name different types of unit weights those are used in so…

Prove: `gamma_d=gamma_t/(1+w)`

`6` Earth is required to be excavated from borrow pits for building an embankment. The unit weight of undisturbed soil…

A relative density test conducted on a sandy soil obtained the following results: maximum void ratio`=1.25`, minimum vo…

The moisture content of an undisturbed sample of clay belonging to a volcanic region is `265 %` under `100%` saturation.…

Prove: `n=e/(1+e)`

By the three phase soil system, show that the degree of saturation `S_r` in terms of unit mass weight `gamma_m`, water c…

A sample of wet silty clay has a mass of `126\ kg`. The following data were obtained from laboratory tests on the sample…