Which one of the empirical formula is used for predicting transmission length?

A pre tensioned beam is prestressed using 5mm diameter wires with an initial stress of 80 percent of the ultimate streng…

The designed anchorage zone in the main reinforcement using transverse stress distribution should withstand the ________

The secondary reinforcements can be bent if the suitable packets are provided behind the ________

The prestressing force of 90 to 95 percent is obtained at about ________

The transmission length required to attain uniform stress distribution in prestress member is acquired through ______

The transverse tensile stress in transmission zone is developed due to concentration of ________

According to Marshall the wires of 2 and 5mm diameter are stressed to ________