Fire Protection in Building, Carpentry and Joinery

Course: Construction & Building Materials — Practice MCQs, solutions, formulas & past entrance questions.

image Guest

You need to login to ask any Questions from chapter fire-protection-in-building-carpentry-and-joinery of construction-building-materials

Chapter:

fire-protection-in-building-carpentry-and-joinery (Click to view content)

1. Cut nails are _____ in section.


Hint Answer

2. ____________________ system includes a supply of dry chemical, an expellent gas such as compressed nitrogen, detection devices and nozzles for discharging dry chemical into hazard area.


Hint Answer

3. ________________ are used in case of mortise and tenon joint.


Hint Answer

4. _________________ is a non combustible building material with low coefficient of expansion.


Hint Answer

5. Which of following is not a cutting tool?


Hint Answer

6. During fire, human body can withstand temperature upto ______


Hint Answer

7. _______________ is a term which is used to indicate a recess formed in a piece of timber.


Hint Answer

8. In ______ joint, two Timber pieces are placed touching each or and n wooden or iron fishplate are placed on opposite faces.


Hint Answer

9. Which of following boring tool is used for deep boring?


Hint Answer

10. The term ________ is used to indicate art of preparing internal fittings and finishing of timber.


Hint Answer

Nexttt

All Chapters

View all Chapter and number of question available From each chapter from construction-building-materials

Functional Planning of Buildings

Functional Planning of Buildings

Important Building Components

Important Building Components

Site Investigation and Ground Techniques

Site Investigation and Ground Techniques

Foundations

Foundations

Deep Excavations, Pile Foundations and Caisson

Deep Excavations, Pile Foundations and Caisson

Stone and Brick Masonry

Stone and Brick Masonry

Composite Masonry

Composite Masonry

Load Bearing Walls

Load Bearing Walls

Cavity Walls & Partition Walls

Cavity Walls & Partition Walls

Scaffolding, Shoring and Underpinning

Scaffolding, Shoring and Underpinning

Damp Proofing, Water Proofing and Termite Proofing

Damp Proofing, Water Proofing and Termite Proofing

Cement Concrete Construction

Cement Concrete Construction

Arches, Lintels, Stairs and Formwork

Arches, Lintels, Stairs and Formwork

Doors, Windows and Ventilators

Doors, Windows and Ventilators

Fire Protection in Building, Carpentry and Joinery

Fire Protection in Building, Carpentry and Joinery

Floors and Flooring

Floors and Flooring

Roofing Materials

Roofing Materials

Pointing and Plastering

Pointing and Plastering

Painting, Varnishing, Distempering, etc

Painting, Varnishing, Distempering, etc

Acoustics and Ventilation

Acoustics and Ventilation

Air Conditioning, Thermal Insulation, Stones & Ferrous Metals

Air Conditioning, Thermal Insulation, Stones & Ferrous Metals

Steel, Timber, Mortar, Plastics, Non-Ferrous Metals and Alloys

Steel, Timber, Mortar, Plastics, Non-Ferrous Metals and Alloys

Glass, Lime, Clay Products & Bricks

Glass, Lime, Clay Products & Bricks

Miscellaneous Materials, Plain and Reinforced Cement Concrete

Miscellaneous Materials, Plain and Reinforced Cement Concrete

Construction Equipments

Construction Equipments

Plumbing for Building

Plumbing for Building

Earthquake Resistant Buildings

Earthquake Resistant Buildings

Building Plans, PERT and CPM

Building Plans, PERT and CPM

Rate Analysis, Estimation and Costing

Rate Analysis, Estimation and Costing

Topics

This Chapter fire-protection-in-building-carpentry-and-joinery consists of the following topics

Fire Protection in Building

Carpentry and Joinery

Cut nails are _____ in section.

;

____________________ system includes a supply of dry chemical, an expellent gas such as compressed nitrogen, detection devices and nozzles for discharging dry chemical into hazard area.

;

________________ are used in case of mortise and tenon joint.

;

_________________ is a non combustible building material with low coefficient of expansion.

;

Which of following is not a cutting tool?

;

During fire, human body can withstand temperature upto ______

;

_______________ is a term which is used to indicate a recess formed in a piece of timber.

;

In ______ joint, two Timber pieces are placed touching each or and n wooden or iron fishplate are placed on opposite faces.

;

Which of following boring tool is used for deep boring?

;

The term ________ is used to indicate art of preparing internal fittings and finishing of timber.

;
WhatsApp